You are here: Home » Forum
Results 1 to 5 of 5

Thread: P16 Tap

  1. #1

    P16 Tap

    I couldnt find in the manual but am I correct in assuming the P16 Output taps are post gain/hpf? I know you can select pre/post EQ.

  2. #2
    Super User
    Join Date
    Dec 2012
    Location
    SW Ontario Canada
    Posts
    3,404
    Hi Jared,

    According to the block diagram at the end of the X32 manual, the Pre-EQ tap is post gain and hpf.

    Paul

  3. #3

  4. #4
    Quote Originally Posted by Paul Vannatto View Post
    Hi Jared,

    According to the block diagram at the end of the X32 manual, the Pre-EQ tap is post gain and hpf.

    Paul

    Anyone experience the problem of when you MUTE channels on the X32, the P16 also gets MUTED too ??? Or is this a firmware version issue ??? I'm still at firmware version 10.

  5. #5
    Super User
    Join Date
    Dec 2012
    Location
    SW Ontario Canada
    Posts
    3,404
    Hi Mike,

    Check that the P16 tap of the channels are not Post-Fader. All of our taps are either Pre-EQ or Post-EQ and don't have any muting to the P16's.

    Paul

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •