You are here: Home » Forum
Results 1 to 6 of 6

Thread: Cat5+pwr+dmx multicable

  1. #1

    Cat5+pwr+dmx multicable

    Hi guys,
    know you about rubber multicable contains FTP cat5, power and shielded one pair cable in industry standard, metered and with lower price than Klotz?
    Last edited by Jiří Jirutka; 03-24-2013 at 06:51 AM.

  2. #2
    Senior Member
    Join Date
    Jul 2012
    Location
    Calgary AB Canada
    Posts
    135
    there is a company that makes its called eurocable by Link http://linkusa-inc.com/DesktopModule...-US&PortalId=0

  3. #3
    I know two vendors of this kind of cabels. One is-->

    http://www.sommercable.com/2__default/index.html

    The other one is-->

    http://www.leoni.com/?L=1

    Friend of mine has a 60 meter Sommercable Core, this composit cable cantains:
    +power
    + 2 x DMX
    + 2 x CAT7

    It is on a Schill drum and got Hirose connectors...not that cheap. About 950,- EURO.

    Christian

  4. #4
    I use the Eurocable from Link.

    http://www.linkusa-inc.com/

    It has 12/3 for power, two Cat6, and two digital audio pair. I use one of the digital pair for DMX lights.

    I have 150'. Link did a nice fan at each end, with "snake skin" covering on the individual runs, and installed the NEMA, Ethercon, and XLR connectors.

    It's on a split reel with about 10' on the small split so I don't have to unroll all of the cable if not needed.
    Bob

  5. #5
    Quote Originally Posted by Bob Harvey View Post
    I use the Eurocable from Link.

    http://www.linkusa-inc.com/

    It has 12/3 for power, two Cat6, and two digital audio pair. I use one of the digital pair for DMX lights.

    I have 150'. Link did a nice fan at each end, with "snake skin" covering on the individual runs, and installed the NEMA, Ethercon, and XLR connectors.

    It's on a split reel with about 10' on the small split so I don't have to unroll all of the cable if not needed.
    What's the price?

  6. #6
    The cost will vary depending upon the configuration of the connectors you select, or if you elect to do your own connectors.

    Mine was around $5 per foot with connectors and that included the nice fan on the snake at both ends.

    I selected an Edison M/F for the 12/3 power, Ethercons for the two Cat6 runs, and XLRs for the digital pairs.

    Give RJ (Richard Kenny) a call at Link ... 608-826-4680 x104 He's the go-to guy and will assist you.
    Bob

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •