You are here: Home » Forum
Results 1 to 4 of 4

Thread: Xenyx 1204FX Recordings are Flat

  1. #1

    Xenyx 1204FX Recordings are Flat

    Not quite sure what the problem here is but I'm trying to record a set out of my turntables and the recording is flat (no distinct lows, mids or highs). I'm assuming the effects are only added to recordings if the FX knob is turned up, which it isn't. Or it might even be my cable connecting my turntable mixer to my 1204. Any how, is there any way to completely disable the FX on the Xenyx1204? This is very frustrating, not being able to record a high quality mix...

    Thanks in advance for all responses

  2. #2
    Hi Ken,

    Please tell us how and where the turntable mixer is connected to your XENYX1204FX. Please also tell us in detail the kind of cable used.

    Best,
    Glenn Slater
    Specialist, Product Support Web
    MUSIC Group US
    BEHRINGER

  3. #3
    Quote Originally Posted by Glenn Slater View Post
    Hi Ken,

    Please tell us how and where the turntable mixer is connected to your XENYX1204FX. Please also tell us in detail the kind of cable used.

    Best,
    I have an RCA-1/4" Patch Cable going from my mixer's output into the 1st channel.

    Also, how do I turn all the effects off of the 1204? The manual gives me no clues on how to do this.

  4. #4
    Dear Ken,

    Are you using a DJ mixer with a turntable? Connecting the main output of the DJ mixer to the XENYX X1204USB?

    If you don't turn up the FX send it will not have any affect on the channel. All check that you are using decent quality cables for your interconnections.


    Kind Regards,

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •