You are here: Home » Forum
BEHRINGER_Billboard-XD80USB
Results 1 to 7 of 7

Thread: Use output of X32 as direct output of DAW

  1. #1

    Use output of X32 as direct output of DAW

    Hello,

    Is it possible to use an output of the X32 as an output of Cubase or other software.
    Let's say to have different studio outputs or to have different monitor outputs?

    Thanks, Hans

  2. #2
    Quote Originally Posted by Hans Wouters View Post
    Hello,

    Is it possible to use an output of the X32 as an output of Cubase or other software.
    Let's say to have different studio outputs or to have different monitor outputs?

    Thanks, Hans
    Dear Hans,

    Try this: On the home page of the routing menu, select the Card channels as the source. Then go to the Analog outs tab. Select direct out for what channels you want to come out of those analog outputs. Let me know how this works!
    Chris Painter
    Specialist, Product Support Web
    MUSIC Group
    BEHRINGER

  3. #3
    Quote Originally Posted by Chris Painter View Post
    Dear Hans,

    Try this: On the home page of the routing menu, select the Card channels as the source. Then go to the Analog outs tab. Select direct out for what channels you want to come out of those analog outputs. I hope this helps! Let me know if this works
    Thanks Chirs,

    As soon as I have the X32 back at my PC I will try and let you know.

    Regards, Hans

  4. #4
    humhead
    Guest
    Quote Originally Posted by Hans Wouters View Post
    Hello,

    Is it possible to use an output of the X32 as an output of Cubase or other software.
    Let's say to have different studio outputs or to have different monitor outputs?

    Thanks, Hans
    Do you really mean "as an output TO..."

    You don't need to use the analog outputs, the X32 can do 32x32 I/O via USB or Firewire for record/playback from DAW. It's all outlined in the manual.

  5. #5
    Hi Hans,

    Please make sure to press the SETUP button and make sure that your interface is set to Firewire or USB.Set the Configuration to the I/O that you need.

    On Cubase you may need to go to DEVICES->SHOW PANEL->VST Connections and press ADD BUSS. Add the number of tracks that you need and the X32 tracks will show up.

    Best Regards,
    Glenn Slater
    Specialist, Product Support Web
    MUSIC Group US
    BEHRINGER

  6. #6
    Quote Originally Posted by humhead View Post
    Do you really mean "as an output TO..."

    You don't need to use the analog outputs, the X32 can do 32x32 I/O via USB or Firewire for record/playback from DAW. It's all outlined in the manual.
    He wants to output tracks from his DAW on one of the omni outs.

  7. #7
    humhead
    Guest
    Now you know what others mean? C'mon give it a rest.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •