1.10 Firmware Update and the new version of the X Control PC App

[Steffen Pohl]

No, you can use immediately 1.11 !

I did an Update from 1.09 to 1.11 and I do not find the deesser, xover-filters...

[Jürgen Kirkovits]

I did an Update from 1.09 to 1.11 and I do not find the deesser, xover-filters...

You can find the de-esser on FX slots 5-8, the filters should be available on the matrices.

[Sergey Yurin]

I have changed the version Firmware 1.11 for X32. The updating has passed without problems. BUT! One problem - was found out at moving from "0" faders GEQ on MAIN MIX two faders at the left GEQ from eight involved (selected moving on the display GEQ by a framework) do not want after reset " motorised to jump " in "0". Not virtual faders, namely physical faders, located below than display.

[Sergey Yurin]

I have changed the version Firmware 1.11 for X32. The updating has passed without problems. BUT! One problem - was found out at moving from "0" faders GEQ on MAIN MIX two faders at the left GEQ from eight involved (selected moving on the display GEQ by a framework) do not want after reset " motorised to jump " in "0". Not virtual faders, namely physical faders, located below than display.

[Sergey Yurin]

I have changed the version Firmware 1.11 for X32. The updating has passed without problems. BUT! One problem - was found out at moving from "0" faders GEQ on MAIN MIX two faders at the left GEQ from eight involved (selected moving on the display GEQ by a framework) do not want after reset " motorised to jump " in "0". Not virtual faders, namely physical faders, located below than display.

[Fiona Hammond]

Hi Sergey,

Sorry to hear you are having trouble after updating the firmware. Going to PM you right away.