1.10 Firmware Update and the new version of the X Control PC App

[Doug Hurd]

The X32 1.10 Firmware Update and the new version of the X Control PC App are available for download at http://www.behringer.com/EN/Products/X32.aspx

[Matthew Grzybowski]

Downloaded the PC app, very nice improvements. Very happy with it. Downloading firmware tomorrow. Can't wait to use DeEsser on the pastor this Sunday

[Mateusz Ciesiółka]

I found really small bug in this XControl. The confirm box doesn't show the text which pattern has been chosen, and I guess it should do. Look at the screen: http://www.fotosik.pl/pokaz_obrazek/...c0993fc18.html

Greetings

[Dick Franks]

I found really small bug in this XControl. The confirm box doesn't show the text which pattern has been chosen, and I guess it should do. Look at the screen: http://www.fotosik.pl/pokaz_obrazek/...c0993fc18.html

Greetings

I think that means that all faders will be set to full down posiiton (00 = infinity).

[Mateusz Ciesiółka]

I think that means that all faders will be set to full down posiiton (00 = infinity).

I was pretty sure, this is infinity: ∞. Ok, you might be right.

[Joern Langhoff]

Where are Channel-strip editor now, after update ?? Can't find it on X32. No problem on X-control Ipad.

[Jürgen Kirkovits]

Where are Channel-strip editor now, after update ?? Can't find it on X32. No problem on X-control Ipad.

I don't know why this isn't in the release notes (anymore?), but I found this change log on another site:

1.10 (2012-11-29)
improvements:
- talkback gain reduced (default was way too high)
- surface engine redesigned to support all new models
- handling of fader move events while switching fader assignment fixed
- bus afl solo now always post insert
- sporadic noise when changing insert position removed
- user buttons can now be (re-)assigned to JUMP function regardless of previous function (by holding one
of the SET buttons)
- user defined buttons now correctly return to previous banks when used for sends on faders
new features:
- direct control of all preamps (on setup page) to allow inline recording mode and live card inserts
(route local or aes inputs to card, route card returns to console input channels - set preamp
gain (2.5 dB steps) on this new setup page, adjust digital trim on console 'tape return' channels)
- Dual and Stereo DeEsser Effect with M/S processing option
- phase invert on matrix buses
- xover filter types (butterworth, bessel, linkwitz-riley up to 24dB/oct) on matrix bus eq bands 1/6
(selectable on EQ page). These use bands 1+2 and/or bands 5+6 when activated.
- matrix send taps selectable (pre/pos EQ, pre/post fader)
- independent channel mute and fader safes
- channel/bus mute indication on meter screens
- scribble strip editing removed from CONFIG/UTILTY page - now accessible on SETUP/SCRIBBLE STRIP page
(or use select button + UTILITY shortcut)
notes:
- due to additional scenes parameters (matrix bus options) all scenes that use matrix buses should be checked
(existing scenes do not contain the additional parameters). It is best to initialize the console, then load and
immediately safe back each scene.

[Joern Langhoff]

Thank You...Now I've got it! Very nice.

[Bob Nafzinger]

My firmware is 1.08. Do I have to do 9 first, then 10, then 11?

[navtecki]

No, you can use immediately 1.11 !