Hi guys, my first post on this forum. I have both the DCX and the DEQ, and planning to use them together in a 2-way active system. The DCX will be used to set the crossover frequency and slope of the speakers with no EQ'ing. The DEQ, because of its RTA function, will be used to fine tune any frequency response deviations, as well as perform room corrections. Typically, I've used ARTA to measure the FR of the system in conjunction with the DCX, so the addition of the DEQ will be a first time event for me. Have any of you set it up this way? What are your recommendations? Thank you.
Last edited by Hong Nguyen; 08-25-2014 at 01:30 PM.