Behringer Xenyx X1204USB not working with Pro Tools 10 or 11
I have a Behringer Xenyx X1204USB with ASIO drivers that works just fine in both Audacity and Reaper. I have Pro Tools 10 and 11 installed and it sees the Behringer Xenyx X1204USB Stereo input.
ProTools is running on Windows 8.1 - with the 64bit ASIO drivers from Behringer installed. Protools sees the 1204 and it is selected and pro tools starts fine. Pro Tools acts like it is recording and playing (meters in PT move like they should) but nothing goes out to the 1204. I have mapped the I/O (default) and everything looks right. I add a click track and can't hear it and the meter on the 1204 does not move. When I record it can record but not with anything playing from Pro Tools - but if I change nothing on the mixer or PC and open Audacity or Reaper it plays and records just fine using ASIO for the 1204. I am not using ASIO4ALL - I tried it and PT 11 just quits with a "stopped working" message. PT 10 can use ASIO4ALL but I really don’t want to add another layer and would like to use PT 11.
If I change the Behringer ASIO settings to turn off the input then the output works. However, I need input and output working at the same time.
I can post screen shots of any settings if that would help. I think my setup will show up from my profile but just in case:
Intel Core i7-3610QM 2.3GHz
750GB 7200RPM x2 in Hardware RAID 1
USB 3.0 External HD
Behringer Xenyx X1204USB
Pro Tools 11.2.1
Any help or pointers would be appreciated. I spend 10 hours yesterday trying all sorts of combinations and nothing I did would work.
P.S. I have not ruled out just replacing the Behringer Xenyx X1204USB but then that gets into the questions about with what and I would like to wait for an audio interface with USB 3.0
Host Name : ********
Workgroup : WORKGROUP
Model : ASUS G75VW
Serial Number : C5N0AS4********
Chassis : ASUS Notebook
Mainboard : ASUS G75VW
Serial Number : BSN1234567**********
BIOS : AMI (OEM) G75VW.223 01/07/2013
Intel vPro : 8.00.02.1410
Total Memory : 16GB DDR3 SO-DIMM
LPC Hub Controller 1 : ASUS Panther Point LPC Controller
Audio Device : ASUS Panther Point High Definition Audio Controller
Audio Codec : VIA 8446
Audio Device : nVidia GF110 High Definition Audio Controller
Audio Codec : nVidia 0016
Audio Codec : 1 0001
Audio Codec : 1 0001
Disk Controller : ASUS Mobile SATA RAID Controller
USB Controller 1 : ASUS Panther Point USB xHCI Host Controller
USB Controller 2 : ASUS Panther Point USB Enhanced Host Controller #2
USB Controller 3 : ASUS Panther Point USB Enhanced Host Controller #1
SMBus/i2c Controller 1 : Intel ICH SMBus
Printers and Faxes
Printer : Canon MX410 series Printer (Colour)
That sounds complex. It's even stranger that the desired result is achieved in other DAWs, but not Pro Tools. It sounds like there could possibly be an incompatibility between 2 elements in this equation, but to really get into troubleshooting, I recommend you reach out to our CARE team at email@example.com. Send them the post that you made here and let them know we referred you, they will be happy to help! When you do get a solution, please post it here so it can be seen by anyone else having a similar issue!
Specialist, Channel Marketing