You are here: Home » Forum
BEHRINGER_Billboard-XD80USB
Results 1 to 3 of 3

Thread: Phantom Power Not working after upgrade

  1. #1

    Phantom Power Not working after upgrade

    My phantom power button will not activate phantom power to any channel. I even tried a scene from scratch no luck. I have an old scene that I had overheads on and the phantom power is lit but I can't shut that one off. Running 2.05

    Light on back of x32 is lit on overhead channel but not the button, when I try to activate any other channel nothing lights up.
    Last edited by Ross Costa; 06-12-2014 at 04:20 PM. Reason: additions

  2. #2
    If you have the HA Gain split turned on in the Setup/Preamps tab, then you might only be able to turn it on from the Preamps tab itself.

  3. #3
    Yes That was it didn't realize that was a global setting and would effect all scenes makes sense now THANX.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •