ULTRACURVE PRO: Transfer settings?

[James Burns]

From Inet on Facebook:

"Hi, i'm interested in ULTRACURVE PRO DEQ2496, my question is: when you set one device and store that setting in one of the 64 memory locations, is it posible to transfer that setting to another ULTRACURVE PRO DEQ2496, and what interface I need to do that? Thanks in advance."

[Chris Painter]

From Inet on Facebook:

"Hi, i'm interested in ULTRACURVE PRO DEQ2496, my question is: when you set one device and store that setting in one of the 64 memory locations, is it possible to transfer that setting to another ULTRACURVE PRO DEQ2496, and what interface I need to do that? Thanks in advance."

Hello Inet,

Unfortunately it's not possible to transfer the settings from one DEQ2496 to a second unit.

However, with the DCX2496 model you can exchange presets from one unit to another, using the PCMCIA card slot on the front. Alternately, you can use RS232 so you can save and load presets from the DCX editor software.

Our new iNuke DSP series amplifiers feature a USB connection so you can save and load presets from the iNuke software.


Chris Painter
Specialist, Product Support
MUSIC Group
BEHRINGER