Speaker suggestions for PMP4000

[Bruce Robinson]

As a Program DJ, I often send my main mix to a house sound system. I use the PMP4000 as a mixer fro mics and computer generator audio. I would like to add the option of connecting passive speaker cabinets and am having difficulty getting recommendations from dealers. Any suggestions?

[Andrew Luck]

Hi Bruce! Thanks for your post.

The PMP4000 is 2x400 Watts, at 8 Ohms 2x800 at 4 Ohms. I suggest two of our B212XL passive loudspeakers. You can check them out on our site here:

http://www.behringer.com/EN/Products/B212XL.aspx

[Mike Frymyer]

Hi Bruce! Thanks for your post.

The PMP4000 is 2x400 Watts, at 8 Ohms 2x800 at 4 Ohms. I suggest two of our B212XL passive loudspeakers. You can check them out on our site here:

http://www.behringer.com/EN/Products/B212XL.aspx

I'm using the Eurolive B1520 Pros. They are awesome speakers. I wonder however if it is too much speaker for the PMP4000.

[Bruce Robinson]

Thank you, Andrew. That is most helpful.

Please correct me if I am wrong, but, with the Amp Mode in Main Mix position, I could use four of these speakers, two on each main speaker output, to increase coverage in a wide room.

Thanks, again for your assistance.

[Bruce Robinson]

Thanks, Mike.

The B1520 is one of the suggestions in the manual, too. I think my vendors were trying to steer me to what was in stock.

[Edward Lee]

PMP4000 works fine with both B1520 Pro as well as B212XL and B212XL. For myself, i am using my PMP4000 with a pair of B1520 Pro.