inuke question

[fortunato]

hi. im very interested in the inuke series of poweramps.
have a question regarding the inuke 1000 and 3000 series.
there's no specification of power handling with an 8ohm load.
do they work well with a load bigger than 4 omhs?
if so what is the power specification for 8ohms?
can they work bridged with 8ohms loads?

thanks in advance.

[Chris Painter]

hi. im very interested in the inuke series of poweramps.
have a question regarding the inuke 1000 and 3000 series.
there's no specification of power handling with an 8ohm load.
do they work well with a load bigger than 4 omhs?
if so what is the power specification for 8ohms?
can they work bridged with 8ohms loads?

thanks in advance.

Hello,

Yes, it is no problem using a higher impedance with the iNuke series amps, such as 8-ohms. You can use these amps at bridged operation, both 8 and 4-ohms. Here are the power ratings for these models. I hope this helps!

iNuke 3000DSP
440 w @ 8 ohms
820 w @ 4 ohms
1520 w @ 2 ohms
1500 w @ 8 ohms bridged
3000 w @ 4 ohms bridged

iNuke 1000DSP
160 w @ 8 ohms
320 w @ 4 ohms
530 w @ 2 ohms
570 w @ 8 ohms bridged
1050 w @ 4 ohms bridged


Chris Painter
Specialist, Product Support
MUSIC Group
BEHRINGER