You are here: Home » Forum
BEHRINGER_Billboard-XD80USB
Results 1 to 4 of 4

Thread: ADA8000: Routing Analog In to Digital Out + Analog Out

  1. #1
    gblankendal
    Guest

    ADA8000: Routing Analog In to Digital Out + Analog Out

    Does the ULTRAGAIN PRO-8 DIGITAL ADA8000, route the Analog In to Analog Out besides converting to Digital Out?
    I know that the manual states that the signal present at Digital In will not be routed to the Digital Out,
    but I wonder if this also holds for the Analog In.

    The reason I am asking is because I want to use ADA800 to convert MIC inputs to digital signal without loosing the analog signals. Something like a splitter.

    Anyone knows whether this is possible?
    If not, which alternatives do I have?

  2. #2
    gblankendal
    Guest

    Re: ADA8000: Routing Analog In to Digital Out + Analog Out

    After some more research I found out that this is not possible.
    The ADA8000 only outputs an analog signal if it's coming from a digital input.
    I guess the alternative is to use the DIGITAL SNAKE S16.
    In standalone mode, this should convert an Analog In to both Digital Out and Analog Out.
    Please correct me on this if I am wrong.

  3. #3
    Michael.Maeurer
    Guest

    Re: ADA8000: Routing Analog In to Digital Out + Analog Out

    In standalone mode you should be able to use the S16 as you intend to use it.

  4. #4
    gblankendal
    Guest

    Re: ADA8000: Routing Analog In to Digital Out + Analog Out

    Great! Can I also use the S16 in? standalone mode with a P16-M plugged into the Ultranet port without X32 connected?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •