I'm struggling to get Sonar 8 to control the surface on my X32. I can get audio in (via FiWi or USB), but can't control the surface.
I've set up the surface as a Mackie Control in Sonar, and set up the X32 Remote page as 'Remote Button Enable', Protocol 'Mackie Ctrl' interface as 'Card MIDI'.
I've got 'REMOTE' button pressed on the X32 and the 8 'bus' faders are all showing 'mute'. I can press 'DCA' and get the transport control on the displays, so it looks like it should work. But it doesn't.