You are here: Home » Forum
BEHRINGER_Billboard-XD80USB

Search:

Type: Posts; User: Paul Vannatto

Page 1 of 20 1 2 3 4

Search: Search took 0.10 seconds.

  1. Replies
    1
    Views
    6

    Hi Rich, Welcome to the forum. Unfortunately,...

    Hi Rich,

    Welcome to the forum. Unfortunately, I don't think any of us will know until it actually ships and someone will have a chance to try it with that scenario.

    Paul
  2. Replies
    10
    Views
    240

    Hey Alex, try these two plate fx presets. The...

    Hey Alex, try these two plate fx presets. The first one is the one I use most of the time. It is the original Vocal Plate preset that came with firmware 1.x that I converted to 2.x. The second is one...
  3. Hi Randy, Welcome to the forum. Unfortunately...

    Hi Randy,

    Welcome to the forum. Unfortunately that sounds like a hardware failure, possibly power supply. I would suggest you contact CARE at care@music-group.com or phone at (1) 702-800-8290 for...
  4. Hi Kim, It looks as though you got a yes and...

    Hi Kim,

    It looks as though you got a yes and no (both answers were correct), because you asked a double opposite set of questions. To answer your questions definitively, go to the Recorder, config...
  5. Replies
    36
    Views
    743

    Amazing what we all learn here. I have the same...

    Amazing what we all learn here. I have the same problem when I change tires (or have them changed). Standard procedure is to mark the inside of the tires LF (left front), etc. But I can never...
  6. Replies
    4
    Views
    86

    Good news and bad news regarding this topic....

    Good news and bad news regarding this topic. Using Patrick's X32-OSC document, I discovered that the OSC command for this feature is /-prefs/lamp and the value is a float value (real type) of 0-1....
  7. Thanks everyone. I was away from the X32 when I...

    Thanks everyone. I was away from the X32 when I responded. But just for clarification, there are 2 modes the show/scene screen can be in the X32-Edit: X32-Edit and Console. In the X32-Edit mode, the...
  8. Hi Tyson, Welcome to the forum. I had the same...

    Hi Tyson,

    Welcome to the forum. I had the same question as Florian. Could you please elaborate?

    Paul
  9. Hi Oliver, I don't believe so, Oliver. Scenes...

    Hi Oliver,

    I don't believe so, Oliver. Scenes can be done this way, but not shows. But it can be done with some OSC commands, now that we have a full documentation, thanks to Patrick...
  10. Replies
    36
    Views
    743

    Do you also carry a GPS to keep track of where...

    Do you also carry a GPS to keep track of where you are, Bill??? :cool:

    Paul
  11. Replies
    7
    Views
    759

    I do agree Rudolf that it is cumbersome using the...

    I do agree Rudolf that it is cumbersome using the Scene Parser. With that in mind, I am planning on adding that functionality as another tool in the Live Toolbox, which will make it far less...
  12. Hi Jon, Welcome to the forum. I don't have one...

    Hi Jon,

    Welcome to the forum. I don't have one of these newer mixers (UFX1604), but did have my eye on it before switching to the X32. I do have a similar mixer (of another brand) and made my own...
  13. Very wise advice Bill. Thanks And many thanks...

    Very wise advice Bill. Thanks

    And many thanks to you and many others here who use the X32 day in and day out as part of your business/job, and are willing to share your experience and insight...
  14. Replies
    21
    Views
    921

    Hi Alice, First of all welcome to the forum....

    Hi Alice,

    First of all welcome to the forum. Hopefully after all these posts, your question has been answered, at least somewhat. Our church has had their X32 full console for 2 years (less a...
  15. Hi Paul, Welcome to the forum, and thank for...

    Hi Paul,

    Welcome to the forum, and thank for posting such a neat solution.

    Paul
  16. Replies
    36
    Views
    743

    Ditto, Scott. I'm having the same problem. Paul

    Ditto, Scott. I'm having the same problem.

    Paul
  17. Sam, I just checked and unfortunately that...

    Sam, I just checked and unfortunately that webinar was never posted. Good news is that the same topic is planned for another webinar in the near future. Also good news is that Behringer has invested...
  18. Sam, that webinar was held back in May and was...

    Sam, that webinar was held back in May and was really helpful for us who attended. I'm not sure if it was ever posted on the Behringer YouTube channel or not. Let me find out. In the meantime, if you...
  19. Mario, try downloading the zip file from the same...

    Mario, try downloading the zip file from the same link above

    Paul
  20. Hi Mario, Let me upload a zip file of the...

    Hi Mario,

    Let me upload a zip file of the doc.

    Paul
  21. X32 Unofficial OSC Protocol Document Update

    We now have an updated OSC protocol document, thanks to the efforts of Patrick-Gilles Maillot. Patrick has spent an enormous amount of time searching and verifying each OSC command to ensure accuracy...
  22. Replies
    5
    Views
    144

    That's was similar to my experience with the...

    That's was similar to my experience with the feedback destroyer of the deq2496. I set it up but it would never trigger and do its job. But I also have been using the DSP1124 for the monitors for...
  23. Replies
    5
    Views
    144

    Hi Timothy, Welcome to the forum. I had a very...

    Hi Timothy,

    Welcome to the forum. I had a very similar setup (before going to the X32). Check to see if the feedback destroyer section in the DEQ2496 actually works. I could never get mine to work...
  24. Replies
    148
    Views
    12,140

    Not necessarily. We just got confirmation that it...

    Not necessarily. We just got confirmation that it hadn't been implemented to this point. Glenn and I couldn't remember. Maybe if someone adds in the Feature Requests section for maybe v3.0 and enough...
  25. Replies
    3
    Views
    114

    I totally agree with you Jeff, that it would be...

    I totally agree with you Jeff, that it would be far better on the X32 itself. But I'm also promoting this toolbox as a "proof of concept" for the developers. If enough users show that a certain tool...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4