Search:

Ages ago I used to have a PCMCIA Card attached to my laptop and a RME INterface to work as an 24 Channel ADAT interface. It led 16 channels of the ADAT out of an Behringer DDX. Maybe you get one used...

Hi Jim,

anf thx for the fast reply. To be serious: got two broken faders, one broken S16, 4 non-working channel led meters on 3 X32 items I had the pleasure to work with during the last 6 months....

same here. fader #8 on dca section dont move anymore by motor. when changing banks there is a strange noise. this is the 2nd time this error occours, got a previosly desk changed by the German...

ymmd, mate (switched over from presonus to x32). sorry for off-topping. Henry

maybe you got mine ;)

*deleted by Moderator*

Thx Glenn, exactly what I tried to tell with my poor English. Thats why I pointed to the OSC option what X32 is willing to understand (refer to the OSC protcol on the d/l page). _Maybe_ one can put a...

Same vice versa ... converting a KNOWN wav source to mp3 will let you hear the difference of lossy cmpression. Had this a few month ago when I finished a band's CD and they convertet it themselves to...

Go to setup tab and untick the HA and Fader Link option and here you go.

Henry

Input channel configuration.

Cheers, Henry

Routing setup

Dont get me wrong, Kjell, but I guess there are only Midi commands for changing the scenes in X32. CC as in the old DXX or NRP, Sysex in Yamahas seem not to work. Maybe youre getting happy with...

Maybe I didnt dig deep enough but I cannot find the manuals for the new Apps. Especially the Ifon App dont tell me what it does and what the number 1-4 are for. I remeber the days when Behringer did...

maybe you have them circle-connected, havent you? made the same issue by myself. Attach your scene file to have the care team ore one of the users look at it.

Henry

Feature Request:

Would be nice to make the display LEDs for gates show up if they are CLOSED. These days they show that they are CLOSING. In other words: during a long release phase for toms the...

same here: DESSER is absolutely useless, waste of time of the developer team. Display (LEDS) only show up any deessing once it it cranked full up. Low "dessing" (deploder???) does .... nothing a HPF...

sry mate, but reads like the the issue is in front of the desk. Once the S16 works it works to my knowlegde. Maybe you can post (attach) your scene file to have a look at. And maybe your S16 isnt...

As I had a few issues with x32 here's my list I worked while changing to my last (3rd) x32:

1. Check Faders: Make different fader seetings on different banks and check if they return to the...

Just FYI I got my defective X32 changed by the German dealer Thomann (who did a very good job with this, thanks mates). Had an issue with DCA fader #8

...

FYI

http://youtu.be/NDqQRsCJmo8

Video of the defective fader #8

Purchased the desk from Thomann in Germany. Got in touch with them, mabe they change the X32 for a new one tomorrow.
...

Fader down to zero.

https://lh4.googleusercontent.com/-9Fz2HXJZz4Q/UM782v-YL2I/AAAAAAAAAmI/EGJuKwu4GdE/s784/Bildschirmfoto+2012-12-17+um+12.03.39.jpg

Fader up to -27 db, the left and right...

I just noticed that the gain of the S16 cannot remotely adjusted via the Ipad App. Can anybody confirm or tell me what I am missing, please.

Henry

Edit: And YES, the S16 is plugged in the...

@Greg: very nice setup. Prevents the S16 builtin connectors from being damaged. I guess you spent another 500 Euros for Rack, Patchbay and wiring.

Henry

thx for the hint @Chris. Will give it a try on Friday before the next show s running. Else I guess I will need to pick it up and travel to thomann (400 km) next week. Hope they change the faulty...

got a sticky fader on the dca section #8. doesnt return to the value it should when I switch banks. will need to be sent to repair after the next shows as long there's no way to calibrate on the desk...