Search:

Dear Todd,

Thank you for sending us your Show File. It turns out there was a slight mispatch- Channels 2-6 had (Aux) inserts engaged, and those channels were feeding to DCA 1.

Let us know if...

Dear Mike,

This is a Logic setting. Within Logic, go to Options / Audio / I/O Labels... There will be a drop-down menu for Reset. Click on Reset All Labels. It should default back to mono...

Dear Ruben,

Check and see if you're within 30 days (upon receiving your replacement console) as the dealer should still swap it out. Otherwise our CARE Warranty department can help get this fixed...

Dear Greg,

Please PM me your contact and console serial number and I'll see what I can do.

Kind regards,

I think Scott pretty much nailed it. By creating a network that is effectively "hidden", limiting the number of devices that can connect to the network, and using a difficult alphanumeric password,...

Dear Henry,

You can delete individual Scenes by pressing the VIEW button within the Scenes section then press the UTILITY button. Delete will be an option above the third encoder.

Kind regards,

Dear all,

The mute, fundamentally, mutes the input. What are you trying to do? As Michael suggested, sending sources to a DCA group will work well for muting the stereo buss but not the...

Great to hear, Craig! :)

Dear Billy,

Try initializing the console- in case some microphone preamps are cranked on unused channels. Press the SETUP button and tab over to CONFIG. Using the first encoder below the screen...

Dear Fausto,

I just spoke with our management for clarification. BEHRINGER repairs are to be performed within the country the unit was purchased in. If you have additional questions feel free to...

Dear Emiliano,

I'm sorry to hear about your console's issue. Please PM your contact information and someone from CARE will contact you.

Kind regards,

Dear Cole,

It looks like your fader is defective. I would contact your dealer and have the console exchanged. Let me know if there's anything I can do.

Kind regards,

Dear Gerald,

The NU3000 will do 2 X 880 Watts @ 4 Ohms. The Quick Start Guide is incorrect. I will pass this along and get this updated.

We Hear You!

Kind regards,

Hi Rowen,

Please verify that the input banks within the Card Out tab (in ROUTING) are set to Local 1-8, Local 9-16, Local 17-24, Local 25-32.

If you're recording 32 channels simultaneously,...

Dear Brian,

Sorry to hear about the thumping noise on boot you're describing. Where are you located?

Hi Ted,

When the Comp knob is all the way left it is disengaged. Turn the Comp knob clockwise to add more compression effect. The adjacent LED will light when the effect is engaged.

Dear Mike,

Are you using MultiRack in addition to a DAW, simultaneously?

Dear TedJankowski,

I couldn't find any YouTube videos regarding the compressor function of our mixers, specifically. Once you understand how a compressor works and can expect how it will affect...

Dear TedJankowski,

I'm sorry to hear your questions were never answered. I'll find your Thread and see what can be done. By the way, feel free "bug" us in Tech Support, that's why we're here!
...

Dear Yves,

Please call or email our CARE Parts Department at (702) 800-8290 or at care@music-group.com for BEHRINGER parts!

Kind regards,

Dear Walt,

Pre EQ (Signal is tapped before EQ & Comp/Expand) / Pre Fader
Post EQ (Signal is tapped after EQ, but before Comp/Expand) / Pre Fader
Pre Fader (Signal is tapped after EQ & after...

Dear gramrussell,

Yes, the PMP518M is indeed mono. You'll find that many lower wattage powered mixers (from many manufacturers) will output in mono. The L/R RCA inputs will still sum to mono but...

Hi Scott,

I'm sorry to hear you're getting hum on your console. Would it be possible for you to email me your board's Show File? I'd like to pull up your settings on my X32 and go from there. ...

Dear Jiří,

Here's Mr. Behringer's answer to that question from the Sound on Sound forums- ...

Dear Jiří,

Please PM me your info and serial numbers and I'll see what can be done!

Kind regards,