Search:

Hi Brett,

Sorry to hear you are having difficulty with your UCA222. If using Windows, I recommend you download and install the 2.8.40 driver via the following link:...

Hi Ruben,

Sorry to hear that. Please make a warranty request via the Behringer site:
http://www.behringer.com/EN/Support/Warranty-and-Service-Information.aspx

A member of our team will assist...

Dear Michael,

While we will note your computer specs and pass them on to our software team, we are unable to offer you in-depth software support pertaining to your particular computer. When using...

Hi Jiri,

Sorry to hear this. Could you please PM me, providing me with your USB stick specs?

Kind Regards,
Fiona Hammond
CARE EMEA
MUSIC Group
BEHRINGER

Hi Kerry,

Sorry to hear you are having difficulty with your X32. I shall PM you now for your contact details.

Kind Regards,
Fiona Hammond
CARE EMEA
MUSIC Group
BEHRINGER

Hi Marius,

Please refer to the View Sheet, downloadable via the 'documentation' drop-down menu on the MX2004A product page.

Direct link:
http://www.behringer.com/assets/MX2004A_P0030_V_YY.pdf...

Hi David,

Sorry for the delay! I shall PM you now to resolve this.


Kind Regards,
Fiona Hammond
CARE EMEA
MUSIC Group
BEHRINGER

Hi Fritz,

I think the easiest way to see what is happening is for us to try out your showfile. Going to PM you now.


Kind Regards,
Fiona Hammond
CARE EMEA
MUSIC Group
BEHRINGER

Hi Ronni,

Sorry to hear you have had difficulty with your system setup. I shall PM you now to troubleshoot.


Kind Regards,
Fiona Hammond
CARE EMEA
MUSIC Group
BEHRINGER

Hi Dave,

If I understand you correctly, you would like to record two sources independently via USB. To do this, hard pan your two input channels left and right respectively. Set up two mono...

Hi François,



For the record, this is not actually so. When FX slots 1-4 are set to INSERT they may be used as inserts like FX slots 5-8.

In the EFFECTS MAIN screen, select a unit and turn...

Thanks for letting us know Emiliano!

Kind Regards,
Fiona Hammond
CARE EMEA
MUSIC Group
BEHRINGER

Hi Steve/Paul,


Q)It is possible to have 2 X32's running or tied together, one as FOH and one as Monitor mix desk?

A) Yes. Connect MON and FOH together on AES50 A. Sync - MON set to LOCAL,...

Hi Mike,

Sure you can use your bass with the V-AMP 2! You may find the presets and effects are not catered for the frequency range of the bass guitar signal and may not translate well resulting...

Hi Henry,

Sorry to hear you are having difficulty with the aux inputs on your X32. I shall PM you right now to resolve this.


Kind Regards,
Fiona Hammond
CARE EMEA
MUSIC Group
BEHRINGER

Dear Ian,

Sorry to hear you are having difficulty with your EPX2000. I shall PM you for your contact details to get this matter resolved.

Kind Regards,
Fiona Hammond
CARE EMEA
MUSIC Group...

Dear Michael,

Sorry to hear you have difficulty when using XiControl with the X32.

I have not been able to replicate the fault using the latest XiControl version 2.0.2 with our X32 running...

Hi Scott,

The X32 compact is not designed to be rack-mounted, but to be housed in a flightcase.


Kind Regards,
Fiona Hammond
CARE EMEA
MUSIC Group
BEHRINGER

Hi Russell,

You need to send the FX return to the mixbus via your bus sends, just as you would when sending a channel to the FX unit.

navigate to the third layer with the AUX IN/USB/FX RETURNS...

Hi Marionas,

Please make sure you do not have anything connected to the 2-TRACK RCA in/out as the USB and the 2-TRACK function on an either/or basis.

Ensure you have selected the Behringer...

Hi Greg,

If your desk features an on-board signal generator, check that the oscillator is not activated and routed to the mixbus.

Kind Regards,
Fiona Hammond
CARE EMEA
MUSIC Group
BEHRINGER

Dear Antonio,

From the product page http://www.behringer.com/EN/Products/DCX2496.aspx

V1.16 features the ability to select many more EQs than before. Processor performance has been optimized,...

Hi Nick,

Sorry to hear this. Could you please send me your system's specs and X-Control version in a PM so I can notify our software team of the issue you are having?


Kind Regards,
Fiona...

Hi Jamienprice,

Sorry to hear you have been having difficulty with your Q1202USB.

I would first like to ensure that you first have your gain structure in check, and that what you are not using...

Dear Andy,

Sorry to hear your story.

We have invested heavily in our care center in the UK, and aim to offer a repair turnaround of 10-14 days (part-dependent, as with any repair).

To...