Type: Posts; User: Gary Weller
Dumb question, where do you check for the version at?
I'm using an inexpensive Hisense Sero 7 Pro ($150) tablet I got @ Walmart, Mixing Station works great on it.
Lol! It's just a logical tap point placement to facilitate mixing monitors from foh, my A&H GL2400 has it, it should be a no-brainer for this desk to be the same as most desks.
Some flash drives are "finicky" when used in the usb slot on the console. I have one that works everywhere except on the X32 desk.
They still didn't fix the pre-eq tap point on this firmware. It comes AFTER the low-cut, not BEFORE, There is a work-around, but you must waste a band of your channel eq to do so, WHY???
I had hoped Behringer had fixed this with the new firmware, but no luck.
Why can't we have a Pre-EQ Send Tap that is actually Pre-EQ? The current tap point is AFTER the Low-Cut filter, not BEFORE...
Got my P1 today. The only thing I had available here to test it against is a Shure PSM 200 receiver using it wired.
The Shure wins in volume & tone quality.
The P1 sounded "strained" (limiter...
I bought the Compact for space reasons doing mostly bar gigs. The scribble strips IMO is a must have when dealing with layers. With the new 2.0 firmware, they've taken care of the few things I'd miss...
There was about a twelve hour window that Amazon had them listed as in stock with an extra two days for processing the order, maybe they just got a small shipment in at first. On the last webinar,...
I ordered it from Amazon, it shipped today.
Has anyone tried one of these yet? I've got one coming next Tuesday for our drummer. I was wondering if the output is hot enough.
Which it is on my GL2400,my question is why didn't behringer realize this while in design stage. I'm sure the connector is circuit board mounted and cannot easily be rotated (just guessing).
Guess the drummer will have to wait until 2.0 is released. Glad they fixed it.
My drummer is going to IEM and I don't want to mess up his mix if I need to adjust a gain for foh. Another S16 is an expensive solution when I have 16 internal preamps doing nothing.
Exactly what I experience as well. On my GL2400 I used to split the vocal channels to have separate gains for the Mons, worked great.
Yes I am aware of that. Right now I use 1-16 for FOH and 17-32 (example: chan 1 & 17 are both coming from input 1 from the S16) for mons.
I have a X32 Compact with one S16, is there a way to use the internal board preamps for the monitor mix to allow me to adjust the gains separately from the S16? What I need is to be able to adjust...
Actually it's not, on my GL 2400 the connector is reversed from the X32, the locking tab is completely accessible , where on the X32 the tab is blocked by the stem of the light.
I just don't understand why they can't admit that they installed the connector upside down. Even if you rotate the light's connector, the locking tab is in the wrong position.
Couldn't you use one of the aux ins ?
I don't believe Behringer is offering the road case as a single item yet. The roadcase is offered only as part of the "tour pack" which includes the mixer.
"IF" the new Midas digital snake works with the X32 line, I might sell my S16 and buy the Midas...for the preamps.
There has not been a new iPad app for the new firmware yet, since the firmware is still in Beta mode. You shouldn't have been in a hurry to install.
I tried to load/import one of the new channel presets from 2.0 beta to 1.15. It loaded blank when imported to the 1.15 library. Didn't try to load any 1.15 scenes to the beta. Love the save entire...