Search:

Hi Thomas,

Thank you for bringing this to our attention. I am sorry to hear you are having difficulty with your X32. This is something that I have not discovered before. I think the best way...

Hi Jared,

Glad you found it on the list, for the benefit of the wider community it's listed in the "D" section under DIGITAL MIXER X32.

Kind Regards
Jim Knowles
CARE EMEA / Tech Support...

Hi Henry,

I am sorry to hear that you have experienced this failure twice now, that certainly is very strange! I would be very interested to learn more about the circumstances surrounding the...

Hi Rafael,

Sorry to hear you are having difficulty with your X32. From what you have described so far it sounds like you have ruled out most of the usual suspects. Of course I cannot rule out a...

Hi Jamien,

Thanks for contacting us. I have looked into this issue and found the problem to be driver related. I too have experienced the same issue when recording with Audacity using the Windows...

Hello Emiliano,

I am sorry to hear that you are having difficulty with you X32. You details are with our Italian Warranty agent who will contact you ASAP to advise you further. If the console was...

Hello Jose,

I am so sorry to hear that you are having difficulty with your X32. I will have our Spanish translator contact you via PM as soon as possible to advise you further.

Kind Regards...

Hi Nick,

The weight/dimensions of the X32 compact are as follows, L 62.2 x W 51 x H 21.5. Weight is 15.4 kg.

Hope this helps :)

Kind Regards
Jim Knowles
CARE EMEA / Tech Support
MUSIC...

Hi Granville,

It seems odd that your only hearing it in one headphone. Check that the MONIT output is indeed STEREO, it may be MONO output and in which case that will be the root of the problem,...

Hi Anthony,

I am sorry to hear that you are experiencing problems with your B912's. If you purchased the speakers within the last 30 days then i would urge you to return them to the store of...

Hi Granville,

From what you describe it sounds like you may be peaking the input level on audacity a little, try the following.

.Connect the Small Jack end of the Cable to the Headphone socket...

Hi Emerson,

The iNUKE Remote Connect Software is currently only available for Windows XP, Windows Vista, Windows 7 (32-bit and 64-bit). You "may" however be able to run the software on your MAC in...

Hi Ole,

It sounds like you have your "AUX OUT TAP" set to PRE FADE instead of POST FADE.
Select routing, tab across to AUX OUT, use the 5th encoder and set the TAP to be POST FADE for each AUX...

Hi Dave,

I Will PM you regarding this issue.

Kind Regards
Jim Knowles
CARE EMEA / Tech Support
MUSIC Group / BEHRINGER

Hi Gerrit,

I will PM you straight away to discuss this further and get you up and running.

Kind Regards
Jim Knowles
CARE EMEA / Tech Support
MUSIC Group / BEHRINGER

Hi Gentlemen,

Thank you for bringing this to our attention. Feedback such as this is very useful and gratefully received. I have made our quality team aware of your observations. Thank you once...

Hi Keith,

Thank you for bringing this to our attention. I have carried out a few simple tests on an X32 regarding this issue. I set up a couple of scenes and saved them. On both scenes i created...

Hi Mike,

Thanks for your feedback. If you are creating a IEM mix on a linked pair of Mix Busses then the PAN control can be found on the 2nd BUS SEND encoder for that pair in the BUS SENDS...

Hi Greg,

You can run the P16 from either of the S16 P16 outputs or from the X32. It sounds like you need to change your routing. Press the ROUTING button then tab across to the AES50-a Tab. in...

Hi Lee,

Unfortunately we don't supply an official lamp for the X32 so here's the pin configuration your chosen lamp will need to be.

PIN 1 (not connected)
PIN 2 (not connected)
PIN 3 ...

Hi Deborah,

Thank you for bringing this to our attention. I am sorry to hear you are having issues with your X32. I will PM you right away to discuss this further.

Kind Regards
Jim Knowles...

Hi Dave,

Thank you for bringing this to our attention, it appears to be working now, if you have any further issues though please don't hesitate to let us know. :)

Kind Regards
Jim Knowles...

Hi Michael,

This could be related to channel to DCA assignment. Have a look to see if you have any duplicate assignments. For instance, if you have channels assigned to DCA 2 that are also...