Search:

Hi Robb,
You should be able to record 32 channels of audio over USB2/Firewire 400 with a PowerMac G5. The X32's XUF interface card works with Core Audio which is supported by Logic 8 & Leopard. To...

1. Do the 6-band parametric EQ's on the mix busses have the same EQ "type" selections (shelf, cut, para, etc.) as the 4-band EQ's on the input channels? These EQ's are on each of the mix busses,...

Dear Raphael,
The part of the S16 documentation you refer to is talking about the SuperMAC / AES50 protocol in general, not about the implementation on the S16. When using the protocol at 44.1kHz /...

Dear Joern,
The S16 Digital Snake can work in stand-alone mode, sending the 16 inputs to the ADAT outputs and the ULTRANET port for P16 use as you describe. A USB/Firewire interface with two ADAT...

Dear Stephen,
Yes, the X32 at broadcast position can connect to the S16 via AES50 for 16 inputs while using 16 of the on-board mic preamps. You can then run a CAT5 cable to the FOH board out of the...

Dear John,
It sounds like there is no need to "free up" outputs 1-8, because you can use them locally at the X32 and on stage at the S16 simultaneously. For example, output 1 on the X32 would see...

Dear John,
By default, the first 16 AES50 outputs on the X32 (which is what feeds the S16 outputs by default) are set to "Out 1-8" and "Out 9-16". "Out 1-8" and "Out 9-16" refer to whatever is...

Dear Ron,
You can send a stereo mix to in-ears by linking buses as you describe. To do so, select a mix bus and press HOME button near the screen. Press the first encoder to link the to the...

Hi Paul,
Do you have studio monitors connected to the dedicated Monitor outputs on the back of the X32? If so, are you hearing a stereo signal on your monitors? The headphone signal should be...

Dear Harry,

You should connect your speakers to the CTRL ROOM out jacks on the back of the X1622USB. This is because your "Main Mix" is what is going through the USB to your computer. This...

Hi Steve,
You can use the PMP6000 with Active Speakers, but not using the Speakon outputs on the back as these are powered outputs.
You will want to use the 1/4" outputs on the surface of the...

Hi Jared,
Thanks for your feedback!
Regarding your question, the "Chan Process" safe will safe the fader positions for input channels. The "Mix Bus" safe will do the same for the mix buses.
...

Dear Raphael,
Thanks for the kind words, glad you found the Webinars useful!
You are correct that the PRO1 is locked at 96kHz. Either way, the DL251 would only be connected to one console at a time...

Dear Raphael,
The KT DN9620 that you refer to is designed only to be an extender for cases where one must extend a cable carrying AES50 signal beyond the recommended approx. 100M.
Regarding using...

Hi Jared,
I have answered your questions below.
Hope it helps!

Best,
John DiNicola
Senior Specialist, Product Support
MUSIC Group
BEHRINGER

Hi Ozzy,
Congratulations on the new purchase! When using the S16s, you need to change the settings on the "Card Out" page of the ROUTING menu.
Change each bank of card outputs from "Local" to the...

Hi Tom,
The Subwoofer, Link, & Line outputs on the K3000FX are standard line-level outputs. This means that you can connect them directly to an Active Speaker as you describe. If you wish to use a...

Hi Gayle,
You can use both the ULTRANET port on the X32 and the ULTRANET port on the S16 (via AES50) at the same time.
Just connect your P16-M to the X32 ULTRANET port as your describe, just...

Hi Henry,
When downloading firmware updates on the X32 product page, you will see a link to "Release Notes and Update Instructions" just below the title of the download. This PDF file contains a...

Hi Mike,
When looking at FX slots on the EFFECTS page, select the desired FX slot and rotate encoders 1 & 2 (beneath the screen) all the way to the left until both sides of that FX slot say...

Hi Jack,
This is normal behavior, as there is nothing assigned to this fader when you are using the Matrix layer. Matrix mixes 1-6 are on faders 1-6, with the mono/center channel on fader 8. Hope it...

Hi Guys,
I wanted to confirm that currently the USB player only supports the playback of Stereo 16-bit WAV files and they must be at the same sample rate that the console is set on (44.1 or 48 kHz)....

Hi Guys,
I have tested multitrack recording & playback with Sonar X2 on a Windows 7 laptop and had no issues, but have not tried Windows 8. Have you tried installing the USB driver through...

Hi Cameron,
Happy to hear that you are happy with your new X32!
Check back often, as we are always posting new Tech Talks and other X32 related information here in the forum.
This is also a...

Hi Gary,
Currently we have not implemented this feature on the X32. As always, we will forward your request to the developers.
Thanks for your feedback!

Best,
John DiNicola
Senior Specialist,...