You are here: Home » Forum
BEHRINGER_Billboard-XD80USB

Search:

Type: Posts; User: Tim Padrick

Page 1 of 13 1 2 3 4

Search: Search took 0.01 seconds.

  1. Make sure that the techs aren't fiddling with the...

    Make sure that the techs aren't fiddling with the headamps all the time. Some folks never seem to get that the headamps affect everything that's fed by a channel.

    I don't recommend letting folks...
  2. If you have a capable person sitting around...

    If you have a capable person sitting around during service, stick him/her in a nearby room with speakers or headphones, and use a pair of auxes (if you aren't using them all) and an iPad for a...
  3. Thread: Midas M48

    by Tim Padrick
    Replies
    5
    Views
    298

    Some analog consoles are not too far from the...

    Some analog consoles are not too far from the modularity you describe. They also cost a lot more than 'normal' consoles.

    The modern, semi-affordable console that's close to what you want is the...
  4. You want an isolation transformer, such as...

    You want an isolation transformer, such as http://www.radialeng.com/twiniso.php. If you are close enough, you can go right in with a TRS cable.
  5. Replies
    5
    Views
    244

    Find a response graph of your vocal mic model -...

    Find a response graph of your vocal mic model - one that includes the proximity boost. Create an EQ that flattens the peaks. Here's what one popular unit looks like:
  6. Replies
    15
    Views
    488

    I think that the only time I'd want to feed an FX...

    I think that the only time I'd want to feed an FX with a subgroup is if I am using a substantial amount of subgroup compression. I'll seldom run all of the vocals into the reverb - usually just the...
  7. Replies
    27
    Views
    2,287

    Put the X32Rack or S16 next to the drums. This...

    Put the X32Rack or S16 next to the drums. This takes care of the drums and amps (if it's a small rack, stand it on end to take up less space). Then all you need is a small drop for the front line.
  8. Thread: v3.0

    by Tim Padrick
    Replies
    71
    Views
    7,741

    Between the two banks and the DCAs, I don't see...

    Between the two banks and the DCAs, I don't see the need for user layers on the surface (well, perhaps on the little ones). On the App or Edit, all you need are View Groups as on the Mackie App...
  9. Replies
    7
    Views
    597

    One of the Apple Airport routers allows you to...

    One of the Apple Airport routers allows you to connect your iPad's music player to the router wirelessly. The router has an audio out to connect to the X-Air (or whatever). Expensive, but it's the...
  10. Replies
    2
    Views
    125

    All that's needed is a little "shelf" on the...

    All that's needed is a little "shelf" on the bottom. Otherwise they'd need to make a holder not only for every phone, but for every case that's made for every phone. Some cases are not so easy to...
  11. Replies
    7
    Views
    197

    "...riding the solo wireless assigned to DCA1". ...

    "...riding the solo wireless assigned to DCA1". I do not understand what this means. Please explain.
  12. Replies
    24
    Views
    767

    I think you'll find it a mistake to record...

    I think you'll find it a mistake to record signals that are post EQ & dynamics. Live we have to make a lot of compromises that likely will not work well on a recording mixdown. Do it Nick's way.
  13. L/R will contain the channels that you are...

    L/R will contain the channels that you are sending to the subs. So unless you are hi-passing the L/R buses, there's nothing to be gained by adding the sub out bus.
  14. Thread: Midas M48

    by Tim Padrick
    Replies
    5
    Views
    298

    Modular is the way that Crest is going. No idea...

    Modular is the way that Crest is going. No idea about the price though.
  15. Replies
    36
    Views
    992

    Send the drop back. You'll be forever cursing...

    Send the drop back. You'll be forever cursing that you got only 25', and only 8 channels. Use your existing snake - the 4 returns will be handy for IEMs or powered wedges.
  16. Replies
    16
    Views
    618

    The X-Air boxes might be a more economical way to...

    The X-Air boxes might be a more economical way to fulfill your needs.
  17. Replies
    43
    Views
    1,812

    I can't imagine why console DCAs are not set up...

    I can't imagine why console DCAs are not set up to move the faders of the assigned channels, so that when one has the channels on the surface, the effect of the DCA on the channel can be readily...
  18. Replies
    4
    Views
    227

    Make sure that the FX are set to 100% wet. ...

    Make sure that the FX are set to 100% wet.

    Make sure that the FX returns are not turned up in buses 13-16.
  19. If you have the same model router for your rig as...

    If you have the same model router for your rig as for at home, make sure that you set them up with different IP address ranges so you can test your rig router at home without having to shut down the...
  20. If the channels with only 1/4" ins have gain...

    If the channels with only 1/4" ins have gain controls, you may be able to use them on very loud sources such as drums (you'll have to max the gain or close to it). I've done this on several...
  21. Here's an example - ignore what you don't need.

    Here's an example - ignore what you don't need.
  22. Replies
    6
    Views
    218

    Channels or buses (e.g. Aux Sends)? There's no...

    Channels or buses (e.g. Aux Sends)? There's no need for a graphic on a channel (99.99% of the time anyway).
  23. Replies
    13
    Views
    344

    Make sure that the Wet/Dry on the FX is 100% wet....

    Make sure that the Wet/Dry on the FX is 100% wet.

    Make sure that the returns are not dialed into bus 13.
  24. Make your you did not accidentally plug into the...

    Make your you did not accidentally plug into the line jack. It happens.
  25. Replies
    18
    Views
    696

    The router's manual will tell you the IP address...

    The router's manual will tell you the IP address as it came from the factory. There are several common factory defaults. You can use the default, or change it.

    Here's a sample network (just...
Results 1 to 25 of 316
Page 1 of 13 1 2 3 4