You are here: Home » Forum

Search:

Type: Posts; User: Peter van Gils

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Yes ;-) you don't need to use the mix busses (I...

    Yes ;-) you don't need to use the mix busses (I like to keep my mix busses free for other purposes: 6 wedge mixes, 8 IEM mixes and 2 fx busses).

    Use the M/C bus as the sub-bus.
    Make sure that...
  2. I'm afraid so if I read this in the release...

    I'm afraid so if I read this in the release notes:
    "The new HA Gain Remote option allows console gains to be remote controlled by another console (e.g. for using X32 RACK as a Digital Snake)".
    But...
  3. There is an additional new feature in v2.0x that...

    There is an additional new feature in v2.0x that allows you to control the headamps of a X32 remotely, eg to use a X32 rack as a S16. Question remains whether this new feature also allows you to...
  4. I know that it will be possible to control the...

    I know that it will be possible to control the headamps of a X32 full/compact/producer/rack from another X32 by enabling remote headamp control with v2.0x, but will it also be possible to control an...
  5. Headamp control of S16 "behind" X32 Core with v2.0x

    I could not find an answer to the question below:

    I have the following setup / AES50 connections:
    FOH: X32 full <--> Stage: X32 core <--> S16 <--> S16 (+ 8 additional ADAT outs)

    The X32 full...
  6. Replies
    5
    Views
    255

    As far as I can see in the video below (at...

    As far as I can see in the video below (at 12:18), it's a CR2032.
    http://youtu.be/en84LnnGmjE
  7. Replies
    5
    Views
    255

    Same issue here: if the board has been in storage...

    Same issue here: if the board has been in storage for some time, the time is off by minutes to hours. My board is stored at approx. 15 degrees Celcius; maybe this is too cold for the battery powering...
  8. What about assigning one of the user-assignable...

    What about assigning one of the user-assignable buttons to the tap delay? ;-) Works flawless!
  9. Please, tell me where I can find these Airplay...

    Please, tell me where I can find these Airplay adapters (preferably integrated in a router so it fits in the back of my X32 road case).
    I don't want to setup my laptop on all gigs: there's not...
  10. I think you're drawing conclusions too fast....

    I think you're drawing conclusions too fast. There are order of magnitudes more Airport Expresses on the street than X32s: if there would be a structural issue with the Airport it would have Apple's...
  11. Ok, did some tests with X32 and Airport Express...

    Ok, did some tests with X32 and Airport Express (the current flat model with power cable and 5GHz support, NOT the old plug-in type):
    - Airport firmware version 7.6.4, there is no option in the...
  12. Ok, will try when I have my desk (and Airport)...

    Ok, will try when I have my desk (and Airport) setup (currently in storage).

    That's a misconception I think: there have been intermittent wifi issues with some of the firmware versions, but the...
  13. To be clear: sometimes my X32 is working with the...

    To be clear: sometimes my X32 is working with the Airport Express, sometimes I need to reconnect the X32 ethernet to get it working.
    I know that a straight cable should work (always, and not...
  14. I'm also using an Apple Airport Express (because...

    I'm also using an Apple Airport Express (because I like the Airplay feature) and, indeed, there is an issue getting the X32 to talk to the Airport. I think the issue is on the ethernet connection...
  15. Replies
    9
    Views
    486

    Routing and sync source are separate things: -...

    Routing and sync source are separate things:
    - Sync source only defines which device provides the clock. In a digital system you need 1 clock (and not more) to prevent that one of the devices would...
  16. Replies
    7
    Views
    875

    For some users it would be helpful to have a tool...

    For some users it would be helpful to have a tool to check a scene file. This tool should tell whether there is a loop or not and the loop path(s).

    Tip: I have muted the sends of the FX returns to...
  17. Replies
    13
    Views
    1,125

    Paul, with this, Keith probably means that...

    Paul, with this, Keith probably means that monitors are mixed from the same board at FOH. So, if you would use input delays, the delay would end up in the monitors as well. If you would have a...
  18. Replies
    13
    Views
    1,125

    Why not use the delay per input?

    Why not use the delay per input?
  19. Sticky: Low cut on talk back

    I'm using a condensor gooseneck as talk back mic. Unfortunately, these mics "plop" quite easily. There seems to be compression on the talk back already, but I'm missing a low cut.
  20. Replies
    7
    Views
    1,116

    Yes, please, I want sends on faders for...

    Yes, please, I want sends on faders for matrixbusses!
  21. Wait for the X32 Core to be available and put it...

    Wait for the X32 Core to be available and put it next to your DAW. The X32 Core will have the same recording features as the X32, so you can run a short USB/FW cable between DAW and X32 Core. Between...
  22. Replies
    10
    Views
    1,028

    My point was that in the live "warzone" anything...

    My point was that in the live "warzone" anything can happen, eg somebody unplugs something (power, signal and/or aes50) while your amps are powered on. You may be doing everything to prevent this,...
  23. Replies
    10
    Views
    1,028

    My opinion: put a dcx2496 in every amprack (I...

    My opinion: put a dcx2496 in every amprack (I have 3). It allows you to use the ampracks without the X32 and makes the setup more fool proof and more robust. If you rely on the X32, then pops and...
  24. +1 !

    +1 !
  25. Replies
    20
    Views
    2,136

    James, yes, it will work as you described: if you...

    James, yes, it will work as you described: if you assign a bus to one of the local aouts and send that set of aouts to the S16, you will have the signal at both places.

    Todd, you must be confused....
Results 1 to 25 of 56
Page 1 of 3 1 2 3