Assign the channels to a DCA or multiple DCAs and then use the DCA fader(s) or mute(s) to mute the FOH signal while leaving the pre-fader IEM signals on. We once had a Mackie console on which the...
Type: Posts; User: garyphillips
Assign the channels to a DCA or multiple DCAs and then use the DCA fader(s) or mute(s) to mute the FOH signal while leaving the pre-fader IEM signals on. We once had a Mackie console on which the...
Assuming you mean recalling a saVed scene from the USB:
1. Press the "VIEW" button in the scenes section,
2. Press the "UTILITY" button adjacent to the screen,
3. Press encoder #4 labeled...
I wonder where that setting originated; one would think a more standard ratio would have used in light of the lack of support for full screen mode. Standing by for v1.0...
What is the correct screen resolution for XControl; that is, the resolution that will produce a full-screen image?
gp
You want to assign all of your channels (if not using groups) to the mono/center channel, then at routing>analog assign one of the analog outputs to the mono/center signal. If you are using groups,...
Hey Jonathan -
At your suggestion I contacted Gator earlier this week, and after several iterations of emailed "blank stares" the word was that Gator will not have a case for the X32 for at least...
