And the FOH footprint will be even less, once the Rack ships. I'm planning on putting it into a flight case which will go on top of the amps and mix remotely. This will greatly reduce the...
Type: Posts; User: Paul Vannatto
And the FOH footprint will be even less, once the Rack ships. I'm planning on putting it into a flight case which will go on top of the amps and mix remotely. This will greatly reduce the...
Last I heard it was $2500US
Paul
Cool!!
Paul
Hey Bill,
I had my wife read your post. Her response was "Wow" 2 or 3 times. So it won't take much convincing for me to get the Rack once it comes out, thanks to you. :).
Paul
Hi Ragnar,
Great to hear that it worked out for you. And thanks for explaining the background of what you are trying to accomplish. I have helped in recording a Christian heavy metal band a few...
Hi Ragnar,
Great to hear that it worked out for you. And thanks for explaining the background of what you are trying to accomplish. I have helped in recording a Christian heavy metal band a few...
Great to hear, Bill. I think Behringer needs to hire you to make a commercial spot for them.
Paul
Well, to be honest, it seems more strange the way you are setting it up IMHO. If you want the kick to be center in the stereo mixbus, why do you have a two linked channel configuration? Do you have...
Forgot to mention, Jason, that you will need to configure the 1/4" plugs for the signal to go to the ring (center section of the barrel) in order for this to work.
Paul
Hi Jason,
Figured it out. On the Routing menu, Aux out page, assign the Aux Out 1 to 6 as Insert (in the Category field). This will make the Aux out 1-6 on the back of the X32 function as insert...
Hi Ragnar,
I'm in front of the X32 at the church, and have figured it out. Simply choose the first channel in the pair (ch 1). with the Bus Sends section (top center of X32), make sure the top...
Hi John,
You have to assign the inputs in the Routing menu in blocks of 8 (except for the last block, which is a block of 4). Then you can assign any individual inputs to the channel strip. as...
Hi Jason,
There is a way to configure the 6 1/4" Aux In on the back of the X32 as insert jacks. I remember seeing/hearing an explanation in one of the webinars, when they were talking about using...
Hi John,
It is a really simple fix. In the Routing menu (home page), you have probably assigned the S16 for the first blocks of 8 inputs (Inputs 1-8 => AES50 A1-8). To get the inputs at the back...
By the way, those mutes on that Sends page are not channel mutes, I discovered. In other words if you mute one of those, they don't apply the mute to that channel, but mutes the signal that goes to...
Hi Ragnar,
I had to play with your scenario a bit using the XControl app, since I don't have the X32 in front of me (at work). As far as I can see, no you can't adjust the pans on a linked pair...
Darn, I had that same model of monitor, but gave it away, thinking I'd never use it. See, it doesn't pay to get rid of anything (tell that to my wife :) ).
Paul
That is correct, Billy.
Paul
Hi Billy,
The analog out on the routing table are the signal assignments to the actual XLR outputs of the X32. It is the same with the aux out, which assigns the signals to the 1/4" jacks. The S16...
I believe it is the Input Channels Config safe on the param safe tab
Paul
Hi John,
I just got an email this morning from Behringer with the promised Tracktion offer. If you registered your X32, you should be getting this as well. I had a look at this DAW when it was...
Cool, if they do, send us a picture. Maybe Behringer will adopt it as an official X32 accessory. :)
Paul
Hi John,
Turning on the X32 first, then the S16's and other equipment, then finally the amps is how we do it, and turn off in reverse order, using a sequencer. That way the X32, which is by...
Thanks Brian
If Bill had been thinking at the time, he could have requested that they imbed velcro into the plaster :)
Paul
