You are here: Home » Forum

Search:

Type: Posts; User: George Dougherty

Page 1 of 5 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    7
    Views
    228

    Sure, you could submix playback and have 4 line...

    Sure, you could submix playback and have 4 line level inputs available for wireless, but the whole idea is to not use additional outboard gear. It's also of no help if you have 5+ wireless at FOH....
  2. Replies
    7
    Views
    228

    Still doesn't accomplish the goal of picking up a...

    Still doesn't accomplish the goal of picking up a small handful of sources at FOH along with Aux sources for audio playback and having more than 24 channels available from the S16. Since AES50 can...
  3. Replies
    8
    Views
    164

    To really answer your question, you can use any...

    To really answer your question, you can use any number of S16's with any of the X32 mix devices. 1 at minimum, 3 at most on a single AES50 port. Up to 6 S16's connected to a single X32 mix device...
  4. Replies
    0
    Views
    48

    480L FX Presets

    Since the Hall, Room, Chamber and Rich Plate are all supposedly based on the Lexicon 480L it occurred to me that maybe the parameters from the 480L could be mapped to the X32's implementation and the...
  5. Replies
    8
    Views
    545

    I'd suggest using the two to submix one into the...

    I'd suggest using the two to submix one into the other. Chain all the S16 to send 48 channels down one line. Source 32 inputs on your first X32 and mix those channels to your main L/R. Mix to your...
  6. Replies
    5
    Views
    114

    Yeah, the literature shows it as 2/6 rather than...

    Yeah, the literature shows it as 2/6 rather than 3/6. Really, the DCX2496 is so cheap I don't know why you'd bother with the LE unless you maybe just needed something to do crossover and processing...
  7. Replies
    7
    Views
    228

    Not simultaneously though. That's the issue. If...

    Not simultaneously though. That's the issue.
    If I want to use several local playback sources and any local mic pre's. I'm stuck with no more than 24 active channels off linked S16's. That's a...
  8. Replies
    5
    Views
    114

    LE also drops the third input which I want for...

    LE also drops the third input which I want for aux fed subs. That's one of the killer features of the DCX vs anything else new in its competition.
  9. Replies
    5
    Views
    114

    Dcx2496

    I've owned two of these over the years.

    They tended to be a touch hissy on the output side and I had multiple output channels go bad.

    With the improvements claimed by Behringer to QC in the...
  10. Replies
    7
    Views
    228

    Added inputs?

    I know the block of 8 is supposedly a physical limitation so I'd guess the channel count may be as well. That said, the block of 8 assignment issue would be a non-issue if you could actually address...
  11. Replies
    8
    Views
    545

    They make it already. It's called the Pro1. iPad...

    They make it already. It's called the Pro1. iPad app sucks compared to the X32.
  12. Replies
    5
    Views
    126

    That would be handy, even a UDK section for...

    That would be handy, even a UDK section for consoles without UDK's. I tend to do fx timings on rotary encoders and tap tempo on one of the buttons.
  13. Make sure your card outs are set to the same...

    Make sure your card outs are set to the same inputs you're using on the X32 compact. Used my X32 with an S16 setup provided by a production company for the first time recently and took me a few...
  14. Replies
    10
    Views
    271

    I discovered this by accident as well. Used an...

    I discovered this by accident as well. Used an installed network cable to run signal to the P16D and found out with my network tester that the installer botched the cable connections. Almost seemed...
  15. Each AES50 port will handle 48x48 at 48K. That...

    Each AES50 port will handle 48x48 at 48K. That means you could utilize up to 6 S16 + the local analog inputs on an X32 setup. You're still limited to 32 defined channels plus up to 6 aux overrides,...
  16. Replies
    10
    Views
    431

    As much as the rack costs, a shock rack to help...

    As much as the rack costs, a shock rack to help protect it is a good investment, as is a UPS with voltage regulation.

    For those on IEM, you may consider moving them to the P16M if they don't...
  17. Replies
    12
    Views
    822

    Recalling a show does not recall the board state....

    Recalling a show does not recall the board state. You need to capture last state to a scene, save your show, recall your show then load. The scene containing the desired state.
    That was confusing...
  18. Replies
    3
    Views
    185

    That's what I generally do for live. The...

    That's what I generally do for live.
    The stated purpose is as I said. Would like 3 stereo matrix and the ability to have a mono dump without having to go through and set mono mix sends on all...
  19. Replies
    3
    Views
    185

    Main L\R to Mono

    Would be handy to have a mono send option like on individual channels from the Main L\R Main page. Looking for an easy dump stereo to mono feed besides using the matrixes, especially when already...
  20. Replies
    18
    Views
    1,379

    I would say it's at least very worthwhile making...

    I would say it's at least very worthwhile making one an X32 Rack if you're using the full console and want two S16. Then you have the flexibility to run monitors from the rack or have a backup/small...
  21. This is one of the reasons I've been ditching my...

    This is one of the reasons I've been ditching my old Neutrik X series connectors for the new XX series without that silly cutout that gets dented or broken off entirely.
  22. The good news is that used iPads are still of...

    The good news is that used iPads are still of some value and will put you a chunk of the way toward a new one, especially if it's in good condition.
  23. Replies
    0
    Views
    82

    Quick select in snippets

    Going through to select all the inputs on the snippets page is a royal pain. Anywhere there is a large set of selectable items like that it would be handy to press-hold and spin the selection knob...
  24. Replies
    42
    Views
    1,515

    It's also a known issue that under some...

    It's also a known issue that under some circumstances you can get a pop or audio drop without the proper cable. The recommended cable is a shielded cat5e or better with Ethercon on both ends. All...
  25. Replies
    3
    Views
    184

    I'd rarely want to recall the whole rack. I...

    I'd rarely want to recall the whole rack. I might on a yamaha CL where they have a full rack dedicated for effects vs premium and Eq racks. On the x32 I'm better off with snippets myself where I can...
Results 1 to 25 of 104
Page 1 of 5 1 2 3 4