You are here: Home » Forum
BEHRINGER_Billboard-XD80USB

Search:

Type: Posts; User: Robert Lofgren

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. You need to address this issue with their care...

    You need to address this issue with their care service center.

    It is not possible to discuss how to service something over the web, specially when they only are allowing certified repairshops any...
  2. Replies
    3
    Views
    57

    To clarify - Bus SENDS are configured in pairs. ...

    To clarify - Bus SENDS are configured in pairs.

    Unlike many other consoles that configure the actual bus, the x32 configure each channel send to a bus.
  3. Sorry, but I have to ask - Is that Your real name?

    Sorry, but I have to ask - Is that Your real name?
  4. Replies
    9
    Views
    178

    The hugest benefit even if you're only using...

    The hugest benefit even if you're only using x32's is that with a normal consumer grade switch you can extend your network by 100m/300ft for each switch. 700m/2100ft is a non-issue.

    You can do the...
  5. On the full desk the main bus output defaults to...

    On the full desk the main bus output defaults to 15/16 while on the lesser consoles 7/8 is used instead.
  6. Replies
    4
    Views
    98

    Wouldn't that be the same as the spectrum meter...

    Wouldn't that be the same as the spectrum meter on the rta page?
  7. Replies
    82
    Views
    1,571

    Pinnacles video editing suite is quite good. ...

    Pinnacles video editing suite is quite good.

    Microsoft moviemaker is quite good and it's free.
  8. I know that there are ethernet transformers. I...

    I know that there are ethernet transformers. I don't know how much they protect though...
  9. Replies
    9
    Views
    178

    Hmmm, seems like I need to jog my memory again....

    Hmmm, seems like I need to jog my memory again....
  10. Replies
    9
    Views
    178

    Dante is point-to-multipoint and can use normal...

    Dante is point-to-multipoint and can use normal switches to extend the network.

    If you are into recording you can have two (and even more!) computers for redundancy.
  11. Replies
    10
    Views
    208

    Whith a rack you'd still want a stagedrop while...

    Whith a rack you'd still want a stagedrop while the xr already is a stagedrop. I'll bet that many people would buy it to be used with the x32 if it could.
  12. Replies
    9
    Views
    178

    No, you can't control the headamp with x-dante. ...

    No, you can't control the headamp with x-dante.

    Yamaha uses some special tricks that is manufacturer specific. As far as I know the dante protocol have no standarized way of controlling external...
  13. You don't say which x32 you have so unless it is...

    You don't say which x32 you have so unless it is a core you are in for some pretty serious disassembling to access the aes50 connectors inside your x32.

    It may be that you only need to reflow the...
  14. Replies
    9
    Views
    355

    One can actually connect a total of six s16...

    One can actually connect a total of six s16 giving you access to 96 inputs and 48 outputs (not counting the adat and ultranet) for a studio setup or festival use where you'd only need 38 inputs...
  15. Replies
    10
    Views
    208

    Builtin wifi can be a blessing or hell. If I...

    Builtin wifi can be a blessing or hell. If I understand it correctly the wifi is on 2.4ghz and that is a very crowded band. I'd opt for an external wifi-router just because of that.

    The x-air only...
  16. Nope, that would be x-uf in usb mode. However...

    Nope, that would be x-uf in usb mode.

    However the OP mixes x-uf and x-usb in the same post and I can't tell what x32 he is using either...
  17. Have you tried with v1.67 of the driver first?

    Have you tried with v1.67 of the driver first?
  18. Replies
    7
    Views
    218

    I just saw a new hardware revision of the x32....

    I just saw a new hardware revision of the x32. They are now using the same buttons as in the compact/producer. There are also additional screws on top of the surface.

    I personally don't like...
  19. I've never tried that :p That is nice to know...

    I've never tried that :p

    That is nice to know for those cases when I'm not running auxed subs.
  20. Replies
    12
    Views
    316

    He is taking the midi cc's from each fader and...

    He is taking the midi cc's from each fader and map only those that has no audio on them.
  21. Replies
    11
    Views
    302

    Did you take upon Sean's advise to ask for...

    Did you take upon Sean's advise to ask for additional specs via Care? Your response suggests that you haven't done so. If not, how do you know what specs are available upon request?


    This isn't...
  22. Unfortunetley the m/c buss is a separate bus and...

    Unfortunetley the m/c buss is a separate bus and you need to insert its own fx like you would have done on other mixbusses.
  23. I hope that they will ship more than two of them...

    I hope that they will ship more than two of them :p
  24. Thread: v3.0

    by Robert Lofgren
    Replies
    70
    Views
    7,638

    It is actually both. The fpga is programmable...

    It is actually both. The fpga is programmable hardware while the dsp is software. That is at least what I was trying to say.


    I'm sorry but that's how I read your post. If they are paired they...
  25. Thread: v3.0

    by Robert Lofgren
    Replies
    70
    Views
    7,638

    I am not talking about channel taps. I'm talking...

    I am not talking about channel taps. I'm talking about inserts. This was in response to your statement that analog consoles have their inserts selectable pre or post eq. The actual inserts on the x32...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4