What you need to do is plug the wireless into an input that is still routed, and select that input as source for the channel. Just use any free input, even one of the auxes.
Type: Posts; User: Per Sovik
What you need to do is plug the wireless into an input that is still routed, and select that input as source for the channel. Just use any free input, even one of the auxes.
If the screen resolution is too small for the xControl, like on some smaller laptops, you set the desktop to a bigger vertical size than the screen, and it will automatically scroll up and down when...
Hi Gary, I assume you use the second layer instead of sends from the first layer because you want individual eq, no or less compression etc. for the monitor mix.
The effects returns you can simply...
It is really great that Behringer is keeping at it and giving us regular updates of the applications and firmware, and I have only praise for the job that they are doing, but at this point I really...
As long as you want to set up as insert on every channel, it is quite straightforward. If you route Card out to use Local 1-8, 9-16, 17-24 & 25-32 and route Inputs to use Card as source, you have...
Recalling scenes from xControl? Surely that is right there, or are you referring to using the board controls to pull scenes from the PC?
For file playback from scenes I use CombiWave and Boume's...
Mute is a separate item in the <param safe> tab, so doing mutes only is right there for you to use if you want to.
EDIT: Oooops, didn't realize these were old posts!
I haven't actually tried this, but I would imagine that if you assign your main outs (out 15&16) to Monitor L&R instead of Main L&R, and select LR Bus as Monitor Source, you will be able to Solo to...
Just in case it is unclear, you CAN set the compressor to be pre- or post eq, but I guess your statement was somewhat retorical.
I think some of us who don't mind answering questions (the ones we...
What you can do is to have one insert on the (input)channel and a second insert on a group/bus channel. It is also possible to route the signal back through a second input channel, but that would eat...
5. You only need the P16D if you want to power the P16Ms remotely through the network cable, if you run the P16Ms on local power from their own powersupplies, then you don't need any extas.
As for...
There are two ways to move it, either by using the wheel on the mouse, or when not using a mouse, hold down the left click and move the pointer sideways (quite a bit, further than you would think)
Finally, after nearly wanting to tear my hair out, I think I managed to set up a decent template for recording in Reaper, and despite finding the user interface nearly incomprehensible, I'm starting...
Could we have a tuner?
I had mislaid my tuner yesterday, the iPad stuff is crap, and there is no way I'm going to forget to bring my X32, hence ......
You can assign two more outputs to main, and set the relative levels between the two sets by adjusting the speaker inputs, or you can go via the matrix and have individual control of speaker levels...
SETUP - global - Confirm Pop-Ups
If you link two matrix channels, they become stereo and will get the stereo off the Main L/R and any other linked sources. All sources, wether linked or not will have send level on first send and...
I think it would have made sense to put some suitable input-output beside the headphone plug on the right hand side to complement the placement of that pad.
desolation wrote:
> 1 on 1 patching would be awesome, especially when the S16 comes out.
> I frequently use this to split 1 mic input to 2 faders, so I can use
> seperate EQ for FOH and monitors....
What will you be connecting to?
Subs + Tops? Then it should be quite straightforward using ordinary two way speakon leads separately to subs and tops. If you are using the B1800X, then you can run...
JCT Audio Designs wrote:
<snip>
> Also, if you monitor off of Protools (ie. the card) the mic pre becomes
> inactive and it becomes a line trim. Totally unnecessary!!! I hope
> Behringer fixes...
1.07 is out now, so you can skip 1.06
brendonvitiello wrote:
> what about assigning the AES50 to the FX returns is that possible?
Allthough the return signals are present on the DSP Patch, it doesn't look like you can assign them...
navtecki wrote:
> I have build a drum-group by press-and-hold gruop 1 select and press select
> from the drum-channels. Now I want to add to the drum-group a compressor.
> How can I do that? By...
There is a tone generator, gives you sine wave, pink noise and white noise.
