Search:

Yeah the manual also leaves out some very important info like how to set up a stereo group buss (just talks about what a group is and nothing else).

Well I tried it again and it worked this time. I didn't do anything different. I did wait a bit longer after I hit stop though.

anyone have any answers on where each preamp should be set for best signal to noise ratio?

Thank you so much Ken! I'm glad someone was kind enough to help me out there. I will write this down and try this out the next time I'm behind the board.

Sorry it took me so long to reply.... First off yes I have updated the firmware to 1.12. Second yes I waited before I took the usb flash drive out (also the manual says nothing about waiting for a...

I downloaded the manual, printed it out and put it into a binder (I don't like reading manuals from a cpu or a smart phone, I think they belong on paper). The manual has left some things out that I...

As far as I know you can't play anything through usb unless it's on a flash drive and loaded into the usb recorder.

I was wondering if the pink noise level is peak or rms.

I thought I read the same thing. Michael are you aware that the OSC-doc says this?

Can anyone help me out here please? Someone has to know how to set up a stereo group buss properly.

Yesterday was the first time I used the X32 for running the sound at my Church. I plugged a usb flash drive into the X32 (the same one I used to sucessfully update the firmware) and clicked on the...

Can anyone help me out? I really want to know the proper way to set up a stereo group buss.

So I guess the only way I could compress something then duck it would be to comp it in it's channel, send it to a group buss then duck it there?

So what is the best level to set each channel to? I know that A/D converters have a point to where you can overload the converters if you have the input going in too hot. And also that there is a...

Just wondering what the db slope is on the low cut knob. Also how do you change the db slope of the HPF on the mixer. It doesn't mention this in the manual.

Hey guys I was wondering what type of meters are on the x32 mixer. I'm assuming that all the meters are peak db meters because it is a digital mixer. I ask this because I'm trying to figure out what...

I was wondering if there is a way to switch the signal flow of the gate and the compressor? I wanted the signal to go to the compressor first then into the gate so I can switch the gate to a ducker....

How do I set up a stereo drum group buss up ( I wanted to apply compression to the group buss )? I read the manual (page 29) and it doesn't talk about how to properly set this up ( sad that group...