You are here: Home » Forum

Search:

Type: Posts; User: George Dougherty

Page 1 of 6 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    16
    Views
    613

    The DR260 limiters should be set via a meter at...

    The DR260 limiters should be set via a meter at the amp outputs measuring voltage to protect the speaker drivers. Overall volume limiting should be set via policy and consequences. More than likely...
  2. Replies
    31
    Views
    1,556

    I do find when I get a freeze that often...

    I do find when I get a freeze that often switching tabs across the top and back to where I want gets things to resync.
  3. Replies
    31
    Views
    1,556

    Most stability issues are the fault of the router...

    Most stability issues are the fault of the router and wireless connection rather than the software. I have more problems the further I go and the more that's going on. I'm just glad I have at least...
  4. Replies
    16
    Views
    613

    Dont want clipping out of the X32 outputs. Gain...

    Dont want clipping out of the X32 outputs. Gain staging is too hot in that case. You're clipping in the digital domain there and the result is not beneficial even if the Driverack has a limiter. ...
  5. Replies
    0
    Views
    74

    Head amp gain following

    I have a full x-32 I use with a band. Band owns it. Have all my channels arranged and normally run 1:1 with my physical inputs.

    I own a rack and S16. I occasionally use my S16 as an onstage...
  6. Replies
    8
    Views
    159

    You will not take the mixbus direct to p16's and...

    You will not take the mixbus direct to p16's and get reverb. That's your unprocessed signal. The fx returns are your wet channels.
  7. Replies
    3
    Views
    260

    VEQ is "vintage" and has a variable Q as the gain...

    VEQ is "vintage" and has a variable Q as the gain is adjusted. That operation is in line with a more traditional analog EQ response.
  8. iOS 7 IS required for the latest app which works...

    iOS 7 IS required for the latest app which works properly with the latest firmware. Get updated and you'll be fine. At least the ipad 2 supports iOS 7...
  9. Replies
    26
    Views
    3,135

    Another reason you want a canopy is that LCD...

    Another reason you want a canopy is that LCD screens tend to fade when they get hot. Direct sunlight , coupled with max brightness just increases the heat the LCD must deal with and exacerbates the...
  10. Replies
    4
    Views
    160

    Cyberpower makes a decently lightweight UPS (for...

    Cyberpower makes a decently lightweight UPS (for a UPS) in the 450VA range that will easily run a Rack and network gear for 15-20min. If you don't have a UPS, you need one.
  11. You're backwards. The matrix is not a mixbus. ...

    You're backwards. The matrix is not a mixbus. It's a submix of only the L/R and mixbuses, designed to feed other outputs separate from the main L/R.

    So you submix the drums and add them on top...
  12. The only other thing that could be doing it would...

    The only other thing that could be doing it would be for an input channel with it's fader up (send to Main L/R) to be taking its input source from your aux bus. In that case you should also be...
  13. Replies
    6
    Views
    212

    Have you tried going backwards? Link the two S16...

    Have you tried going backwards? Link the two S16 as normal (1-8B -> 9-16A and then use the B on the 9-16 S16? If that doesn't work, then I think a snippet to change your routing (swap your 1-8 outs...
  14. Your Main tab with the Mix 3 selected should not...

    Your Main tab with the Mix 3 selected should not have the LR send engaged. That's what it sounds like is going on.
  15. Replies
    13
    Views
    469

    I thought the intake was on the underside of the...

    I thought the intake was on the underside of the desk and any casing needed to take that into account. Possibly the tablecloth is getting sucked up against the bottom and preventing cooling airflow?
  16. Digital transmission is much more robust than...

    Digital transmission is much more robust than analog in terms of quality in vs out. Quite simply, it either makes it or not. Clocking and buffering on the receiving end takes care of timing issues....
  17. Replies
    53
    Views
    1,781

    At 10K for a touch control surface, I'd rather...

    At 10K for a touch control surface, I'd rather spend the extra on a Pro 2 and have a much better console. Or in that price range a GLD or QL5 would be a better choice.
  18. Replies
    2
    Views
    164

    +1, I do use them with a particular group for...

    +1, I do use them with a particular group for some sound cue purposes, but most of the time the USB input is useless for me. For that matter, being able to overload all the aux inputs from any bank...
  19. Replies
    8
    Views
    398

    Not sure, being nowhere near my console, but I'd...

    Not sure, being nowhere near my console, but I'd imagine if you stepped through all the initialize console options, the Scene 0 would be overwritten with the factory defaults. At the least,...
  20. Where would there be a quality loss? If you had...

    Where would there be a quality loss? If you had a high quality preamp/converter set, feeding 8 channels in via ADAT should be transparent in terms of quality. Or am I not understanding the signal...
  21. Short of cracking the case and tying into the...

    Short of cracking the case and tying into the board, there's no way to get the signal pre-converter out of an X32. All inputs head directly to an AD stage and then route digitally to somewhere else....
  22. Replies
    5
    Views
    239

    It was a feature I'd requested, and in playing on...

    It was a feature I'd requested, and in playing on the console it does appear to work. Set your input layer to the bus view, master section to Matrix/Main, select a matrix and hit SOF. I'd actually...
  23. Multiple consoles and ipad control

    How about a connection library for the ipad app?

    I'm around multiple x32 consoles in different environments with different ip addressing schemes. It'd be great if I could save and name different...
  24. Replies
    8
    Views
    422

    Was this with the older Neutrik X series...

    Was this with the older Neutrik X series connectors having the little cutout window, or the newer XX series? I just swapped all my male connectors for XX series because the window on the X series is...
  25. Replies
    2
    Views
    134

    The desk is cheap enough, I'd still spec a...

    The desk is cheap enough, I'd still spec a dedicated system processor you can lock out. That allows for a backup to be swapped in without rebuilding the system. Store a backup of the install state...
Results 1 to 25 of 131
Page 1 of 6 1 2 3 4