This is really great.
Type: Posts; User: Jeffery Foster
This is really great.
Mine is. Failed fader.
What I would like to know; what was your turn-around time for your repair, not counting shipping of course. Did it seem reasonable? Were you quoted an estimated repair...
I have one S16, and need more inputs.
Will the X32 Rack work as a second stage snake? That is, can I put it with my S16, and use it as inputs 17-32/outputs 9-16 sending to my X32 Console?
I have run 2.01 every single day since if first dropped.
1. You know you have to build your scenes from scratch. No importing v1.15 shows.
2. Just a couple of minutes will familiarize yourself...
I'm successfully(?) using Waves Multirack with the X-UF card.
I say "somewhat" successfully because; due to the 32 I/O limitation, I can't send/return the Mix busses and main L/R to my...
Is this is a physical limitation of the card that can't be addressed with a firmware update?
Thank you for your info.
With a Card Out 33-48 option paired with Outputs 1-16, one could send mix busses to and from a WavesRack. This would allow seamless inserting of a C6 Multiband Compressor, for example.
Perfect, I see it now. Thanks very much.
Thank you Glenn and Per for your helpful advice.
Per, refresh my memory, how would I make aux1 as an insert on the LR Mains?
I'm running Waves Multirack with our x32 console.
What would be my routing solution for inserting plug-ins on the Main L/R out? I hope I'm overlooking something easy, and not...
Saving a blank preset sounds like the plan. I thought I might have missed a "reset" menu item like can be found on an EQ setting.
Thanks for the help!
I know I'm overlooking something ridiculously easy here.
How do I reset a channel strip back to factory default settings on the fly?
Thanks in advance for the answer!
I went a bit cheaper with the Hosa Console Lamp XLR4M 12VDC 5W 15in LTE-297XLR4, for about $20.
When I received it, it's 90degree plug means it blocked the External TB mic input. I took 30 seconds...
The feeling from Behringer is a faulty internal battery. As I understand, it only controls the clock, so I will live with it until I have enough downtime to send it in for warranty.
I had heard this was an issue, so I will dismiss this as an option.
The AES16e-50 card costs about the same as an S16. There is no way I could utilize an S16 in this application, is there?
Thanks for any help.
My console is located 85 feet (~26m) from where my MacPro and DAW sit. This is an unchanging fact of life.
I would like to pass all the 32 xlr input signals,...
Behringer has followed up with this thru email.
So far, I've tested it up to 1 hour and it will keep time when powered off. So I've got it narrowed down to between 1 hour-12 hours before it loses...
Love this console. However, the 24-hour time clock on the display does not hold the time after I power down.
I searched this forum and didn't see any references to this. Has anyone else...
Hi, just got my new X32. It came with Firmware 1.07.
FTR, in updating to 1.13, a 16GB Sandisk Cruzer failed, but a 16GB PNY flash driver worked. Both were FAt formatted prior.