Search:

Ohhh. The Behringer begin fogging. In the previous materials was right, 32 inputs, 16 busses....
Now console have a new inputs and busses.
Dear Vehringer, you have a new hardware of X32? Or you...

I had bought both NU-6000DSP on the first live action, and one was still in protect mode. Played only 2 sec,and switch off, without connected speakers too.
For information, I had one for the left...

I am glad to find users who agree with me.
I think it does not matter if the amplifier is conventional or digital. The reported data should be the same for both types, as is the case with other...

Audio test:
today I test audio signal between RMX5050 and NU-6000
QSC RMX5050 is louder then NU-6000 and the bass frequencies is so fat, on iNuke I had Bass frequencies under 80Hz as from corner,...

Here is another measurement test of iNUKE 6000
http://forum.speakerplans.com/behringer-inuke-nu6000-vs-kam-kxd7200-bench-tested_topic69202.html
The power values is again lower than the manufacturer...

Here is another measurement test of iNUKE 6000
http://forum.speakerplans.com/behringer-inuke-nu6000-vs-kam-kxd7200-bench-tested_topic69202.html
The power values is again lower than the manufacturer...

Please, when will be XControl application for android?

I have debated you put performances with the engineer, who also develops amplifiers, also class D. It states that you, as a manufacturer, you should state the products at their actual performances...

Hi Glen, both units are from Thomann musik haus. Today, I will send both units for change for any other both units, and after I get new two, I can try both on show, I will see, how quallity have iNuke

Here is QSC amp Class-D, measurement by sine wave 1kHz.
http://www.qscaudio.com/products/amps/powerlight3/powerlight3.htm
So, I dont thing, that on class-D is not need test by sine wave.

in any literature that deals with the measurement of class D amplifiers is that the power is measured in the same manner as a linear amplifier, and a sine wave at 1 kHz. Is it true that this method...

Hello Glen and Christian. Have you explanation for quality of soldering? Because it, what I see inside of iNuke is work of china people without rice. I am afraid, that if I use this amp on the first...

Hi all, today I get two amplifiers Behringer iNuke NU-6000DSP. My previous amplifiers was QSC RMX5050 - two pieces.
One week ago, I test output power of QSC RMX5050 to 2x4 ohm load (resistor 5kw,...

On monday, I get two iNUKE NU-6000DSP. I will test output power by 8/4 ohm virtual resistance, both channels simultaneously, with oscilloscope, and tone generator. On next day, here will be results...

Dear Chris,
what you write is not quite true. I do not know how you're an experienced sound engineer, but I and many of my colleagues at the show to interfere with the system processor. While others...

Hi Behringer. For integration of Behringer digital technology to one system will be good, If X32 will be have in future application for remote controll of DCX2496, without PC. By ethernet, in one...

Please, not password. It is must be quick unlock. I am still near console. If I dont want totaly lock, I switch off complette PA system.

Hi, now works fine, but I think, that this key parameter may be linked too.
And what the second problem with DIM on key listen, and DIM light button with setup Use Dim for PFL?

The third problem, found by first and second problem, is:
If I have set Use DIM for PFL, and I solo select any channel, DIM button not light

And the second problem with this. If I select Key Solo - and in monitor setup I have set Use DIM for PFL, no dimming for key listen. Key listen is very loud, and if is key source is another them...

Hi all, please, can you try, if you have the same problem as I
If I try use DYNAMIC with key of another input, I still have the same channel as self
For example, talk over.
player on channels...

Oh yes, I correct it.
thx

This easy manual is for setup of two S16 units as a mirror of local inputs of X32.

Wiring:
X32 AES50A to upper S16 AES50A
upper S16 AES50B to lower S16 AES50A

sync master is X32

Setup...

on email care@.. i dont get any answer about my problem with encoder #3 in bus sends section. if I try cal we dont understand. Behringer support is very, very bad. Behringer wrote - we hear you, this...

This is very good, behind dimming this lamp, this change color from red to hot white.
http://www.thomann.de/cz/littlite_18x4_led_497148_schwanenhalslampe.htm