Perhaps we were talking about using the P16 bus to assign signals to the ADAT outputs of the S16, as they read from AES50 channels 17-32
Probably not to get more outputs per se, but by using the P16 assignments you get routing options that you don't have otherwise, ie. each channel can
Now that I know what to look for I do see a brief mention of ST...but nothing on what it was used for. It would be great to add a little blurb on its
That's a 2K ohm pot, Elfed, probably linear. But that is only a guess. The best bet is to have CARE either tell you the exact specs or have one kicking
That doesn't sound quite like what I remember. It was in the s16 webinar. It's about 30 min into the webinar where it talks about sending unused p16 to
© Copyright 2011. MUSIC Group IP Ltd. All rights reserved.