You must stop the recording before powering off. If you are lucky you can restore the file with a recovery tool.
oh wow, my nominal input gain should be -18? hmm ok. i'll try that.
i'll go through some of the suggestions, but with a Bus mix at -10 dB
The LED above -18dB are yellow. Guess what this want's to tell us.
The nominal level of the X32 is -18dB. Everything above is headroom for processing
To start with, it seems you are running the board too hot, nominal -10dBFS with peaks at -5dBFS is around 10 dB hotter than what most of us recommend.
But he says that he gets the clipping on the BUS when he is adjusting the EQ of the BUS. He is doing a inear mix with one BUS of the X32.
© Copyright 2011. MUSIC Group IP Ltd. All rights reserved.